For the Cone Penetration Test (CPTU) SLP uses penetrometer push rig TG 63–150 from PAGANI–Geotechnical. The rig is equiped to preform Static or/and Dynamic test. We use 50MPa and 100MPa Piezocone with TGAS07 acquisition system. 

SLP’s DPSH equipment consists of a 90 degree cone which may be sacrificial or retained for recovery, a series of extension or driving rods, a torque wrench and a driving device. DPSH uses a 63.5 kg weight over a 760 mm drop height, a 20 cm² cone area (51 mm diameter). 

For tests with SDMT (Seismic Flat Dilatometer), SLP uses Marchetti Seismic Dilatometer.